Audi FSI Performance Cam Follower


$164.95
Out of stock
Login to add to wishlist

Login to add stock notification

 

Looking for a solution to your worn out FSI cam follower?

Tired of replacing your cam follower every 15,000 miles?

Do you want a cam follower that can support custom tuning without wearing out?

We have the solution.  Welcome the HPFP UPGRADE performance cam follower!

The HPFP UPGRADE cam follower has been through 100's of thousands of miles of testing, independent mechanical testing and used in many custom tunes with fuel pressure's commanded pressure over 170 BAR.  Currently not one cam follower has shown any signs of wear or loss of material in the surface of the cam follower.

 

What makes our cam follower different?

 

The basic design of our cam follower is different over the OEM unit.  We moved the holes from the face of the cam follower to the edge.  This move in the holes will aid in lubrication to the face of the cam follower.  We made our cam followers from a different material, this material has been used in lifter, cam shaft buckets and shims for the last 30 years.  Why the OEM FSI cam follower is made of tool steel... no idea.  We have added material to the surface contact to eliminate defection and our cam follower face to wall interface has a taper down design that shares the load through the transition.

 

The most important part of our cam follower is the hard chrome face.  The hard chrome has been used for years in lifters, cam shaft buckets, and shims in many different applications.  These other applications have seen loads more than double the load of a FSI fuel pump at 150 bar of fuel pressure.  The technical details are all over the internet showing the benefits of hard chrome for this application, why the OEM cam follower doesn't use hard chrome... no idea.

 

During our testing we tried several different coatings, ranging from dry film lubricants to VPD applications.  We had followers with DLC coatings and every coating that 3M makes.  We even tried some armory coatings for weapons production.  With all the testing we didn't find a single coating that could compare or perform at the level our hard chrome could.  The coefficient friction of hard chrome is better dry than most of the other coatings tested wet.  Hard chrome wet testing had more than two times the coefficient friction "lubricity" of any wet test from the others.  This was a case of trying to make a better part, but the best was already tested, tried and trued for us... hard chrome was the solution.

 

The solution to your cam followers is here, no longer do you have to worry about the camshaft failures of your OEM cam follower.  You can upgrade to Stage 2+ tunes, you can get custom tuning performed, you can upgrade your fuel pump and make more power without the downfall's of the OEM cam follower!  We provide break in directions with all our cam followers and there is a basic maintenance schedule you should follow for periodic checks of your performance cam follower.  By doing this you should get a lifetime of use out of your cam follower.  We believe in this so much that we are offering a two year warranty on all our cam followers.  If any part of our cam follower fails in two years, we will replace it free of charge.

CAM FOLLOWERS WILL BE SHIPPING OUT THE WEEK OF THE 20TH.



Product Added: January 07, 2012
Part Number: hpfp00018